FORMADA3D ← Paint Racks
Paint Rack Combo

Paint Rack Combo

Updated 3 September 2026 · by Ben, Formada3D (Melbourne)
$74.99 AUD
printed to order in Melbourne
🚚 Shipping: AU $10 (express $15) · FREE AU over $100 · NZ $15 · US $20 · Intl $25
1
🇦🇺 Melbourne made📦 ships in 3–5 days↩️ ACL returns🔒 Card via Stripe🅿️ or pay with PayPal
🖨️Printed to order — in 3–5 business days from our Melbourne workshop
📦Tracked AusPost — a tracking number lands in your inbox the day it ships
↩️30-day returns — change-of-mind returns, plus full ACL cover if anything's wrong
📷 Customer photos coming soon
🌱 Printed in plant-based PLA — made from renewable plant sugars (corn & sugarcane), not petroleum — with a lower carbon footprint than traditional plastics. Every order is printed to order in Melbourne, so there's no mass-production waste and nothing sitting in a warehouse.
📷 See real customer setups →

WATCH IT PRINT

Real print-cam timelapse — this exact product printing in our Melbourne studio

ABOUT THIS PRODUCT

No glue, no screws, no clamps. The rack arrives printed and ready to use; the riser gallery is a tool-free flat-pack that slots together by hand in minutes. Posted from Melbourne — nothing to sand, paint or glue.

Paint Rack Combo — 44 Pot Organizer + Citadel Riser Gallery | 77 Pots Total

The complete Citadel wall: the 44-pot organizer with its hidden drawer, plus the riser gallery on top loaded with Citadel stagger shelves — 77 pots on one desk footprint, every label visible.

The rack's four angled tiers hold 44 pots (32 mm Citadel and SMS size) with a full-width drawer hidden in the base for brushes and clippers. The riser gallery pin-locks into the rack's hidden connector canals — no glue, no screws — adding three staggered Citadel shelves of 11 pots each (6 back + 5 front, offset so every label shows), with front finger slots for one-handed pot removal.

  • Capacity: 77 pots — 44 in the rack + 33 on the riser (3 × 11-pot Citadel stagger shelves)
  • Pot fit: all current Citadel paint pots and SMS 32 mm pots
  • Drawer: hidden full-width drawer in the rack base, friction-fit close (no hardware)
  • Assembly: tool-free flat-pack riser — rail, posts, shelves, pins and wedges
  • Footprint: same desk space as the rack alone; top shelf ~45 cm up
  • Printed to order in Melbourne from premium PLA · 14 colours

Citadel is a trademark of Games Workshop Ltd; SMS is a trademark of The Scale Modellers Supply; Formada3D is not affiliated.

✔ Designed & 3D printed to order in Melbourne · ✔ Ships in 3–5 days · ✔ Australian Consumer Law returns · ✔ Secure checkout

Shelf Setup option (same price): choose how the riser's 3 shelves are fitted — Vallejo/dropper shelves, Citadel stepped shelves (12 pots each), or a mix.

  • 3 Citadel: 77 pots
  • 3 Vallejo: 44 pots + 45 bottles
  • 2 Vallejo + 1 Citadel: 55 pots + 30 bottles
  • 1 Vallejo + 2 Citadel: 66 pots + 15 bottles
SAFETY & USE

⚠️ Magnet safety. This product contains or is used with small, strong magnets. Not a toy: keep away from children under 14. If a magnet ever comes loose, stop using the product and contact us. If a magnet is swallowed, seek medical help immediately.

Colour & finish. This product is made of several printed parts, so slight colour or sheen differences can occur between parts printed from different filament batches. Fine layer lines are part of the 3D-printed finish. This doesn't affect strength or fit.

SHIPPING & RETURNS
Australia: $10 standard / $15 express, free standard shipping over $100 · New Zealand: $15 · United States: $20 · Other countries: $25. Every item is printed to order and ships in 3–5 business days from Melbourne. Returns per Australian Consumer Law — if it arrives faulty or not as described, we make it right.
MATERIALS & SUSTAINABILITY
Printed in plant-based PLA — made from renewable plant sugars (corn & sugarcane), not petroleum — with a lower carbon footprint than traditional plastics. Every order is printed to order in Melbourne, so there's no mass-production waste and nothing sitting in a warehouse. Colours available in matte and standard PLA — see the swatch chart in the gallery.

PAIRS WELL WITH

Paint Rack Riser Display Stand | 3-Shelf Gallery Add-On | Holds 38 Dropper Bottl
Paint Rack Riser Display Stand
from $19.99 AUD
Paint Rack Brush Holder | Clip-On Brush Cup for Paint Rack Organizers | Pin-Cana
Paint Rack Brush Holder
from $12.99 AUD
Rotating Brush Carousel | Spinning Brush & Tool Organiser | Two-Tier Sector Well
Rotating Brush Carousel
from $24.99 AUD
Painting Tray | All-In-One Miniature Painting Station | Water Bay, Universal Wel
Painting Tray
from $24.99 AUD

FAQ

What material is the Paint Rack Combo printed in?
Printed in plant-based PLA — made from renewable plant sugars (corn & sugarcane), not petroleum — with a lower carbon footprint than traditional plastics. Every order is printed to order in Melbourne, so there's no mass-production waste and nothing sitting in a warehouse.

How long does shipping take?
Australia: $10 standard / $15 express, free standard shipping over $100 · New Zealand: $15 · United States: $20 · Other countries: $25. Every item is printed to order and ships in 3–5 business days from Melbourne. Returns per Australian Consumer Law — if it arrives faulty or not as described, we make it right.

Where is it made?
Designed and 3D printed to order in our Melbourne, Australia workshop.

What's your returns policy?
Returns are handled per Australian Consumer Law — if it arrives faulty or not as described, we make it right.

10% off your first order
join the list — the code lands in your inbox
$74.99
Added to cart ✓