BASE MAGNET JIG — Formada3D free model of the month, September 2026
-------------------------------------------------------------------
Magnetise miniature bases without the fiddle.

Eight recesses: 25, 28.5, 32, 40 and 50 mm round, plus 60x35, 75x42 and
90x52 mm oval. Drop a base in, and the jig's own magnet holds yours centred
while the glue sets.

The engraved N mark means every magnet goes in the same way round — so the
whole army sticks to the transport tray instead of half of it pushing away.

YOU WILL NEED
  8 x  8 x 2 mm disc magnets for the jig itself (one per station)
  plus whatever magnets you are gluing into your bases

PRINTING
  214 x 149 x 5.5 mm, about 92 g in PLA
  0.2 mm layers, 3 walls, 15% infill. No supports, no brim needed.
  Print the plate flat, logo side down. The magnet pockets are top-loaded —
  drop the magnets in after printing and secure with a dab of super glue.

Printed one already and want the tidier version? We sell it ready-made,
with or without the magnets: formada3d.com

Licence: see LICENSE.txt. Personal use, no resale of the files or prints.
